Description
A water suspendible calcium powder for oral dosing of cattle, to assist in the prevention of milk fever. This product is to be dosed to lactating cows. For use in power drenching systems.
Active Ingredients
Each 20 g contains:
| Calcium | 8 g |
|---|
Recommended Dose Rate
Adult Cattle: 20 g per head, per day. It is recommended that dosing continue for at least 60 days from calving. If cold weather persists, continue supplementation until conditions improve. Different volumes may be mixed in the same proportions to suit your mixing tank and facilities.
Directions for Use
Flo®Cal should be mixed with warm water (40-50° C) 15 minutes before use to allow hydration of the powder.
1. Add calculated quantity of water to mixing tank and commence agitation.
2. Add Flo®Cal and mix to lump free suspension.
3. Leave product to hydrate for 15 minutes under agitation.
4. Commence drenching.
5. Clean all equipment thoroughly after use. Flush out drench lines.
Note: Always ensure partly used tank mixture is thoroughly re-agitated immediately before use.
Suggested Mixing and Dose Volumes
| Hot Water | 125 L | 62.5 L |
|---|---|---|
| Cold Water | 117 L | 58.5 L |
| Flo®Cal | 25 kg | 12.5 kg |
| Total Volume | 250 L | 125 L |
| Dose Rate | 200 ml | 200 ml |
| No. of Doses | 1250 | 625 |
Cautions
Avoid contact with eyes. Avoid inhalation and ingestion. Wash hands thoroughly after handling. Clean all equipment thoroughly after use. Flush out drench lines.
Storage
Reseal packaging after use. Keep in a safe place away from foodstuffs. Store in a dry, cool place out of direct sunlight. Avoid contact with eyes, inhalation and ingestion. Wash hands thoroughly after use. Keep out of reach of children.
Pack Sizes
25 kg
